The Loaded dervish is a longboard which is well known among longboarding circles for its great ride. Loaded dervish specs are the following:

• Length: 41.5 inches/ 105 centimeters
• Width : 8.5 inches/ 21.5 centimeters
• Wheelbase: 33 inches/ 84 centimeters
• Weight (deck only): 3.4 to 3.6 pounds
(complete): 7.6 to 7.8 pounds

The Loaded dervish is manufactured by Loaded Carving Systems of the United States. Made of a tri-axle fiberglass and epoxy sandwich with a vertically laminated bamboo core, the dervish deck is the perfect balance between flexibility and durability. This means that the board is flexible enough to be very responsive and lively when entering and coming out of sharp turns at the same time does not bottom out unless excessive force is placed on the deck.

When seen for the side, the deck is shaped with a convex camber which compresses when the rider applies his or her weight on it. The board springs back and returns the force applied by the rider when he or she straightens up his or her legs and releases some weight from the board. This results in a livelier ride with little to no loss of forward momentum when carving or going in and out of turns. While the dervish can be used for skating down hills with moderate slopes, Loaded recommends that one uses a stiffer board when going down steep ones. This is because flexible boards become less stable at higher speeds. Nevertheless, the dervish can be used in speeds of up to 30 mph.

The dervish deck is available in two kinds of flex. The Flex 1 board is the stiffer board and meant for people weighing up to two hundred thirty pounds. The Flex 1 board is ideal for people who have a more aggressive riding style. For those who prefer a smoother and more flowing ride, the Flex 2 board may be the right deck for you. It is also meant to accommodate riders weighing up to one hundred eighty pounds.

The dervish has precision milled cutouts that fit most drop through reverse kingpin trucks. It is also narrower at the ends than it is at the middle. This is to eliminate the possibility of the deck biting on the wheels when making sharp turns. This shape also makes it easier for riders to execute shovits and other manual tricks.

The dervish gets its name from the Whirling Dervishes of the Middle East. These Whirling Dervishes are famous for their graceful and flowing movements when participating in rites remembering their god. This inspiration is carried onto the Persian themed graphics which decorates the board.

If you have your own setup in mind or have the necessary trucks, bushings, bearings and wheels already at hand then acquiring the Loaded dervish deck only will not only save you some money but will allow you the freedom and flexibility to try out different set ups which can suit the dervish to your riding style.

The Loaded Dervish is a longboard by Loaded Carving Systems, a USA company. The Loaded Dervish deck is made of a tri-axle fiberglass and epoxy sandwich with a vertically laminated bamboo core. This makes the dervish a board which is both flexible and durable. This flexibility is what contributes to its renowned smooth, agile, lively, responsive and stable ride. If you buy a Loaded Dervish deck only, without anything else, you can customize it later.

The Loaded Dervish deck is shaped in a convex camber which is flexible enough to be compressed when a rider applies his or her weight on it. The board springs back and returns the force that was applied on it when a rider straightens his or her legs and releases some of his or her weight from the board. This results in a livelier ride and little to no loss in forward momentum when carving or going in and out of turns.

The Loaded Dervish deck is available in two degrees of stiffness or flex to accommodate the different types of riders and their riding styles. Flex 1 boards are the stiffer of the two. Meant for people weighing up to two hundred thirty pounds, the Flex 1 board is also aimed at people who have a more aggressive style of riding. Flex 2 boards are meant for people who weigh up to one hundred eighty pounds or prefer a smoother more flowing type of ride.

The Dervish deck has cutouts meant to accommodate most drop through reverse kingpin trucks. This makes the deck ride closer to the ground, lowering its center of gravity. This results not only in added stability but in a board that is easy to push and to slide. With a board running low, there is always the risk of the deck biting onto the wheel when taking sharp turns. The dervish eliminates this possibility by shaping it so that the ends of the board are narrower than the middle of the deck.

As many riders will attest, the Dervish longboard deck is an exciting and fun to ride on. Experiment with different setups on your trucks, wheels, bearings or bushings to suit your riding style. This can all be customized for your Dervish Longboard deck.

One can hardly call the cost of acquiring a Loaded dervish deck cheap. But then again the experience of riding a legendary Loaded Dervish longboard can be considered a priceless experience. Also, you can surely find a Dervish, which is cheap compared to other places that charge over $400! Researching is key.

The Loaded dervish is a longboard renowned within the longboard community for its forgiving, smooth, lively, stable, agile and responsive ride. Loaded Carving Systems achieves this by making the dervish out of materials that have the right balance of flexibility and durability. The deck is made of a tri-axle fiberglass and epoxy sandwich with a vertical laminated bamboo core. When seen from the side, the dervish is shaped in a convex camber which compresses when the rider applies some force or his weight on it. This force is returned when the rider straightens up and releases some weight from the deck. This allows the dervish to lose little to no forward momentum when going in and out of turns.

The dervish is available in two different degrees of stiffness of flexibility to suit both the rider’s weight and his or her riding style. The Flex 1 board is the stiffer of the two and is thus suitable for riders with a more aggressive riding style and for sliding. The Flex 1 board is meant to accommodate riders who weigh up to two hundred thirty pounds. The Flex 2 board is for riders who prefer a smooth and flowing ride. This board is stable and is very responsive at moderate speeds which make it ideal for carving or for short commutes.

Along with the dervish’s flexibility, another factor which contributes to its stability and great handling is its low center of gravity. The dervish has precision machined cutouts designed to accommodate most drop-through kingpin trucks. Drop-through trucks allow the board to sit closer to the ground making it easier to push and slide. This stability also makes the board an ideal platform for dancing.

The board is also shaped differently from the typical longboard. It is narrower at its ends than it is at the middle. This eliminates the possibility of the deck biting onto the wheels when making sharp turns. This comes particularly in handy when avoiding obstacles when using the dervish to commute or sliding and riding down hills.

As can be seen, the dervish can be used to do practically all the things you can do with a longboard. One limitation which Loaded puts on the dervish however, is that it should not be used when riding at extremely high speeds on steep hills. Loaded recommends the use of a stiffer board when riding down steep hills as flexible boards can lose their stability at higher speeds. The dervish though, can be ridden without loss to its stability down moderate hills at speeds of up to 30 miles per hour. Watch out for the cheap knock offs.

The dervish is one of the longboards manufactured by Loaded. Whirling dervish Muslims and the graceful movements they made during their religious ceremonies were one of the inspirations drawn upon by Loaded when they designed this board. And when one looks at some reviews made by skaters, the way they describe the way the board rides can be compared to something close to a religious experience in itself.

The Loaded dervish is renowned in the longboarding world for its agility, stability and forgiving ride. Also described as having one of the liveliest and responsive rides, the dervish has been found to be a great deck one can use in most everything one can do with a longboard.

Loaded Carving Systems makes the dervish out of a tri-axle fiberglass and epoxy sandwich with a vertical laminated bamboo core which not only makes the dervish flexible but durable too. When seen from the side it is shaped in a convex camber which compresses when the rider puts his weight or applies some force on it. The force applied is returned when the rider straightens his legs or takes weigh off the board. This results in little to no loss in forward momentum when entering and getting out of turns.

Adding to its stability is the fact that the loaded whirling dervish has a low center of gravity. This is primarily because it is used with drop-through reverse kingpin trucks. The board has precision milled cutouts that can fit most drop through trucks. Loaded recommends using trucks which are at least 180mm long.

Because of its attributes and great handling, the dervish is great for beginners starting out in the exciting world of longboarding as well as experts who have mastered the sport. Those who have experienced the Loaded dervish describe the ride as smooth, lively, stable, agile and responsive and, with the right trucks, bushings, wheels, and bearings is a great platform for doing almost anything one can do with a longboard. Its stable and smooth ride make it ideal for dancing and the short commute to the neighborhood store. Its responsiveness, agility and stability make it a great board for carving, pumping, bowls, and going down moderate hills. While Loaded recommends the use of a stiffer board when going down steep hills at high speeds (because a flexible board loses its stability at high speeds), the dervish can be used for speeds up to thirty miles per hour.

If you are looking for a Loaded dervish review which has something bad to say about the board you will very hard put to find it. Most of those who have tried riding have praised it for its handling, responsiveness, versatility and its extremely smooth ride.

The dervish, manufactured by Loaded Carving Systems, is made of flexible bamboo wood available in two flexes. Flex one boards are meant to accommodate persons weighing up to two hundred thirty pounds while the Flex two boards are meant for lighter riders weighing up to one hundred eighty pounds.

The board, when seen from the side is slightly convex to allow the board to flex with sufficient play without actually bottoming out the board. The board is a drop through deck, which means that the base plate used to attach the trucks is mounted on top of the board giving it a lower center of gravity.

The Loaded dervish deck is not shaped like your average longboard. It is carved on both ends, with the middle being thicker than the front or the back, the wheels are completely visible when standing on the deck. This makes it possible to make sharper turns than one could normally do with a skateboard without fear of the wheels dragging on the bottom of the board.

All these features combine to give a ride which most Loaded dervish reviews described as smooth and responsive. A lot of riders also raved about the flexibility of the board which allows one to compress the board when entering into turns and using the energy of the rebound to turn out of it resulting in no loss of speed when executing these maneuvers.

Loaded recommends this board for hills/ carving, sliding, bowl and dancing and while they recommend a stiffer board for more stability when going at high speeds, the board does keep its good handling characteristics in speeds reaching thirty miles per hour. The lack of a kicktail can make ollies a little more complicated than usual, but its ability to take sharp turns and coast longer makes this board an ideal mode of transport for short commutes.

This stable, agile and smooth deck is ideal for those who want a board which is capable of most nearly everything one can do on a longboard. Its stability and ability to take sharp turns also make this an ideal and forgiving platform for those who want to enter into the exciting world of longboarding.

For a lot of us, accepting delivery of our Loaded dervish longboard is a thrilling experience.  Once we get it out of the box, we can’t wait to get out and ride the wheels off it.  While the dervish is made to be very durable and can withstand much abuse, giving it the maintenance it needs will allow us to enjoy riding it longer.  Maintenance of longboards is relatively simple and cleaning or installing a Loaded dervish noseguard maybe all we need to do.  Here are some tips to help you maintain your dervish.

The deck of the dervish is made to be very durable.  It has to be in order to sustain the use and abuse its riders put on it.  Thus, caring for the deck of your Loaded dervish can just mean storing it in a cool, dry place.  When a wooden board is exposed to a wet environment and then exposed to sudden temperature changes it may develop cracks and split.  You can also choose to protect your investment by installing Loaded dervish noseguards on both ends of your deck to shield it from the inevitable crashes against the wall or sidewalk curb.

The trucks of a longboard require minimal maintenance.  Since they support the weight of a rider, they are built to be very tough.  The part of the truck which is most vulnerable to wear are its bushings.  These are the small rubber cushions that allow the trucks to pivot left and right.  Since they are made of rubber, they will develop cracks or wear out over time. Luckily they are easily and cheaply replaced.

The bearings are found inside the wheels.  These consist of small metal balls which allow the wheels to spin freely and smoothly.  These bearings do wear out over time and need to be replaced so that you continue to experience a smooth ride.  Dirt can also collect inside them , and if left unclean, can eventually lead them to fail.  If you find any dirt in the bearings, clean them out to prolong their useful life.  Bearings are also easily replaced and sometimes come free when you purchase a new set of wheels.

Finally, the wheels of your dervish is the part of your board which sustains the most abuse.  Over time they will wear out and can develop flat spots or coning.  You can avoid this by rotating the wheels or switching them on your board periodically.

The Loaded dervish is a great all around deck ideal for almost anything you can do with a long board.  Renowned for its stability, lively and smooth ride, and agility, it is a good platform when you want to skate down moderately graded hills.  Loaded recommends a stiffer deck for high speed downhill racing as flexible boards may lose their stability at extremely high speeds, but says that the dervish can be safely used for speeds of up to thirty miles per hour.  Here are tips for a great downhill Loaded dervish setup.

Before even thinking of going downhill, it is essential that you have the proper safety gear.  Besides knee pads and elbow pads, a full faced helmet would also be a good idea as a face plant at thirty miles per hour may be a remote possibility.  It is also recommended that one wears a pair of full fingered slide gloves with a puck that has a little grip for those slides you will be making.  If you have the resources, try to acquire a full leather skating suit to protect the parts of your body not protected by your gloves, helmet and pads.

The dervish is designed for use with drop through trucks.  These are trucks with the base plate attached on top of the board.  The result is a ride with a lower center of gravity for a smoother ride.  The dervish accommodates Randall R-II, Paris, Gullwing Charger, and Fastrack  Longboard trucks and most drop through trucks.   Whatever truck you choose to run, Loaded recommends that the trucks be at least 180 mm.  Harder bushings are also recommended for a loaded dervish setup for downhill action.

Wheels that take turns well are a must for downhill riding.  Loaded recommends that you use 70mm + wheels on the dervish and mentions the 75mm Orangatangs In Heat or the 70mm Orangatang for President.

Good bearings are necessary so that your wheels will run smoother.  For downhill cruising, a decent set of Abec 5 bearings will serve your purpose well enough.  Loaded recommends bearings from Bones Swiss and Pleasure tools.
In order to allow your dervish to take turns better, you can try running trucks a little tighter at the back than at the front.  This will make the nose of your board turn faster.  Ultimately however, how one adjusts his or her trucks depends on his or her riding style.  Experiment with different combinations to find the one that suits the way you ride.

If you are thinking about getting a longboard that will be good at almost anything you can do with it, browse our Loaded Dervish longboard store for a Loaded dervish for sale. You will find Loaded Dervish longboards that will be cheap in price compared to others selling the same exact model.

Manufactured by Loaded Carving Systems, the dervish is made of a tri-axle fiberglass and epoxy sandwich with a vertically laminated bamboo core.   This gives the board just the right amount of durability, flexibility and stiffness for dancing, pumping, riding bowl, or carving at your local hill.  The board is available in two different degrees of flexibility.  The Flex 1 dervish is the stiffer of the two decks and recommended for riders weighing up to two hundred thirty pounds or for those who prefer a stiffer ride.  The Flex 2 dervish is recommended for people weighing up to one hundred and eighty pounds.

The board itself is a work of art with graphics inspired by the smooth movements of the whirling dervishes from the Middle East.  The deck has cut outs that will accommodate any drop-through truck and is tapered at both ends to eliminate the possibility of the board biting into the wheels when taking a sharp corner or going into a slide.

The loaded dervish is renowned for its smooth, agile, lively and responsive ride among longboard circles.  This has primarily to do with its flexibility.  To give you an idea how it works, the board compresses into a concave shape when a rider’s actions and weight are applied on it when entering a turn.  When exiting the turn, the board rebounds, returning the force that was applied to it so that the rider suffers little to no loss in forward momentum.  Its smooth ride and ability to take sharp turns at moderate speeds also make it an ideal mode of transportation when taking short commutes around the neighborhood or crowded city streets.

Its low center of center of gravity (because of its drop-through trucks) and its flexibility have also made it known as a very stable deck ideal for moderate hills and carving.  While Loaded recommends a stiffer board when going down very steep hills (because flexible boards may not be as stable at high speeds) the dervish can be safely used for speeds up to thirty miles per hour.

A brand new Loaded dervish for sale may not exactly be cheap, but the cash you fork over for it will be repaid a dozen times over with years of great rides.

The Loaded dervish is a longboard manufactured by Loaded Carving Systems in the United States.  Made of a tri-axle fiberglass and epoxy sandwich with a vertically laminated bamboo core, it offers the perfect balance between stiffness and flexibility making it one of the best all around longboards in the market today.

Renowned for its responsiveness, agility, smoothness of ride, and stability, the Loaded dervish is an ideal deck for beginners and experts alike.  When seen from the side, the dervish has a convex camber which allows it to flex when entering corners and use the energy applied to it when cornering to rebound allowing the user to experience little to no loss of forward momentum.   It has cut outs to accommodate drop-through trucks and is narrower at its ends than it is in the middle in order to eliminate the possibility to deck bite on the wheels.

The inherent great stability of the dervish makes it a great deck to learn and practice tricks.  The 360 carve twirl is a relatively simple trick but looks great when done properly and smoothly.

It should be kept in mind that when riding any longboard it is important to wear a helmet, kneepads, and elbow pads in order to avoid serious injury.

When starting to execute the 360 carve twirl, move your shoulders so that it is facing forward then move your front foot back towards the toeside of the board.

Next swing your back foot to the front of the board.  Your back foot is now your new front foot and your front foot is now your new back foot.  Once your new front foot is planted, on the front toeside of the board, pivot you new back foot to the right so that you swing around 180 degrees.

The next step is actually like the first, but this time you will be turning your shoulders towards the back of the board and shifting your back foot towards the toeside of the board.  Then, swing your front foot to the back of the board, pivoting like you did during the second step of the trick.

Finally shift your feet back to where they were on the board before you started the trick. If you want to do another spin, go back to step one.

This trick, when done properly looks like you are spinning or executing a pirouette on your board and looks great when done smoothly.

The Loaded dervish board is an exceptional deck which offers the rider a lively, agile, stable and responsive ride.  Those who have tried it out have also praised it for having one of the smoothest rides one could have on a longboard.

Renowned in longboard circles for its stability and agility, the  Loaded dervish board is ideal for longboard tricks known as dancing.  Dancing, as its name implies, involves fancy footwork while riding on the board.  Longboarders often look at the complexity of the footwork and the smoothness and gracefulness in how the maneuvers on the board are carried out.  Here are a few simple tips to get you started on dancing on your board.

The first thing to remember is to always use safety gear. This means that always wear a helmet, elbow pads and knee pads when using your longboard.

One basic trick you can try out is the toe-side cross step.  First place your feet close to the toeside of the board and shift the foot in front closer to the foot in the back.  Make sure that when you shift your front foot, it remains on the toeside of the board and facing towards the front.

The next step is to shift your back foot forward, crossing it over your front foot still keeping both feet on the toeside of the board.  Your feet should be facing forward slightly at a forty-five degree angle.  Your back foot is now the new front foot with the old front foot now your new back foot.

Next, using your new back foot, step forward towards the front, shifting to the heelside of the board.  When shifting your new back foot, it should pass behind your new front foot.  Notice that your new back foot has once again become your front foot and your new front foot is once more in the back.

Shift your back foot close to your front foot towards the heelside of your board then, staying on the heelside of your board, take your front foot and cross it behind your back foot towards the rear side of the board.    Once more, your legs are crossed and your back foot is again your new front foot.

Finally take you’re your new back foot back to the toeside of the board and assume the regular riding position.
This trick can be repeated several times or used in combination with other dancing tricks to make it look more complex.

Among all the Loaded boards, dervish decks are great all around boards to help you get started into longboarding or just upping your game if you already have started on it.

The dervish is a long board manufactured by Loaded Carving Systems and made out of an epoxy and tri-axle fiberglass sandwich with a vert-lam bamboo core.  When seen from the side, it is convex in shape which is what has built its reputation as a lively, agile and stable ride.  To give you an idea how this flexibility works, imagine taking a turn on your deck.  You and your weight press down on the board giving it a concave camber.  When going out of the turn, you straighten your legs and shift your weight allowing the board to spring back and use the force you used on it to turn to preserve your forward momentum.

Like all Loaded boards, dervish decks are beautifully crafted and feature graphics inspired by the motions of the Muslim whirling dervishes in the Middle East.

Because of its benign handling, the dervish is ideal for those who want to try out downhill longboarding.  Here are a few tips you can use to start off.

Safety comes first.  Always use safety gear when using your longboard.  This means a helmet, elbow pads, knee pads, and sliding gloves.  Even the pros use a full-faced helmet and leathers along with this protection when going downhill at speed.

Learning how to stop properly is also essential when carving in hills.  The most basic way of stopping is by taking one foot off the board and dragging it on the ground until you come to a full stop.  When going at higher speeds however, dragging one foot on the ground may not be the fastest way to stop (it’s tough on the shoes too).   You will have to learn how to slide.

Sliding is a great way to take sharp corners and comes in handy when you need to stop in a hurry.  When learning how to slide do so at moderate speeds.  This means finding a hill that is not too steep and with little to no vehicular traffic.  When moving at an adequate speed, bend your knees down as if you were reaching for the toe side of your board.  Lean back just enough so that you don’t tip over and put your hands on the pavement allowing them to drag as your board slides sideward.

The Loaded dervish has been praised as one of the most versatile, agile and stable platforms in longboarding.  A Loaded dervish complete with the suitable trucks, wheels, bearings and bushings can provide a longboarder with one of the most pleasant and enjoyable rides of his or her life.

The dervish is a flexible board made of bamboo with cutouts designed for drop through trucks.  It is carved on both ends to prevent the wheels from biting into the board when taking sharp corners.  And while great looks may have little to do with ride performance, it is an added bonus to own a board which is easy on the eyes—which the loaded dervish is.  The bottom of the deck is decorated with a great looking graphic inspired by the fluid motions Persian whirling dervishes do when remembering their god.

The board is available in two flexes designed to accommodate persons of different weights.  Flex one boards are designed for people weighing up to two hundred thirty pounds while the Flex two boards are softer and accommodates persons weighing up to one hundred eighty pounds.

The loaded dervish is noted for its stability while carving or sliding downhill, street, or parking lot.  Its low center of gravity is made possible with drop through trucks which means that the base plate for attaching the truck gear to the board is actually mounted on top of the board.

Buy a Complete Loaded Dervish

But what most riders note about the loaded dervish besides its stable, agile, and smooth ride is its ability to spring out of turns without losing any forward momentum.  When entering a corner, the movements and weight of the rider presses down on the board making it slightly concave.  When coming out of the turn, the board rebounds with the straightening of the rider’s legs with most of the energy he or she used in compressing it.  The ride has been described a s lively, more responsive and forgiving.

Flexible boards are noted for their responsiveness and agility when doing tricks or carving down a hill at moderate speed.  Loaded recommends that the dervish boards be used for speeds of up to thirty miles per hour.   If you want to go faster, stiffer boards may offer more stability.

While a Loaded dervish complete with trucks, bushings, wheels and bearings of your choice does not come cheap, the experience of riding the best longboard is truly priceless.

The Loaded Dervish is a longboard made of flexible bamboo wood.  Loaded Dervish longboards are similar to skateboards but are generally longer and larger and often used for transportation, or longboarding which may include cruising, downhill racing, slalom racing and tricks.  Longboarding has many parallels with surfing and in fact has often been described as surfing on concrete.

Loaded Dervish Longboard (716) 579-5984

Manufactured by Loaded Carving Systems, the loaded dervish is a carved board measuring about one hundred and five centimeters long (about forty-two inches) and twenty one and a half centimeters wide (eight and a half inches).  It has a wheel base of about eighty-four centimeters (thirty-three inches) and weighs about eight pounds when the trucks and wheels are attached.  The board is decorated with Persian-Islamic flourishes and designs said to be inspired by the “whirling dervishes”, an order of Muslims who are best known for their practice of whirling as a means of worship and remembrance of the their god.

It is also what is called a drop-through deck which means that the board has holes in it allowing the base of the truck mounting hardware to be placed on top of the board.  This allows for a lower ride height resulting in greater stability without loss of responsiveness to turning.

When looked at from the side, the dervish board is convex in shape and is designed to flex when the rider mounts the board or shifts his or her weight around to execute maneuvers or tricks.  This flexibility is meant to allow the rider more control over the board and allow for tighter turns when traveling at slower speeds.  It is also meant to make maneuvers such as slides easier to execute.  While a stiffer board is more ideal for faster speeds, Loaded maintains that the board can be used in speeds of up to fifty kilometers per hour.   The dervish is available in two “flex” settings.  The stiffer board (called Flex 1) is meant to accommodate people weighing one hundred seventy to two hundred thirty pounds.  Lighter users may also use the stiffer boards should they want more stability at higher speeds.  The Flex 2 board is meant to be used by people weighing one hundred to one hundred eighty pounds.

Because of its flexibility, low ride height and ability to make tight turns, the dervish is ideal for negotiating curved roads and avoiding obstacles when using it as a means of transport within the city and for longboarding events such as hills carving, dancing and sliding.